Description
Standards
EN12942
AS/NZS1716: 2012
IP Rating 66
Classification: PAPR-P3TM3
Features:
- AirSensit™ Technology, a smart automated technology that senses the wearer’s breathing to trigger the airflow to ON or OFF.
- Provides High Protection: HEPA filters provide 99.97% filtration efficiency for particles 0.3um and larger, including biohazards(APF 50 & 1000).
- Compact design and lightweight (350g/1 lb), compatible with standard hospital PPE. No belts, hoses, battery packs or heads tops worn above the shoulders.
- Comfortable to wear for extended periods, Don/doff in under 10 seconds.
- Personal adjust system that covers a range of faces to deliver high Fit Test results every time.
- Easy-to-clean/disinfect and integrates into standard protocols: Medical grade materials can be disinfected with standard hospital agents. Can be cleaned/disinfected on the ward or in centralized reprocessing areas.
- Water tolerant with IP rating 66: suitable for use in decontamination showers and can tolerate frequent cleaning.
- Longer battery usage: Up to 9 hours of continuous use with rapid charging time in less than two hours, with low battery alarm that provides full protection for every user, every time.
- Sturdy, shock-resistant casing ensures durability of the unit.
- Altitude compensated filter blocked detection
- Easy and accurate flow capability check
- NIOSH Approved fully tested and certified: ensures reliable protection.
- With CE Mark approved
- Available HEPA filters and accessories (sold separately)
***Masks sold separately
Visual/Audible alarms:
- Particulate filter end of life
- Battery charge level
- Low battery warning
- Manufacturers minimum design flow: 120L/min
Specifications:
- Peak airflow: Up to 230 l/min
- Weight: 350g
- Lithium-ion polymer battery
- Operating time: up to 9hours
- Battery recharging: less than2hours
- Operation: –10°C to +45°C (14°F to +131°F) at <90% relative humidity
- Charging temperature range: 0 ̊C to 35 ̊C
- Storage: –10°C to +35°C (–4°F to +131°F) at <90% relative humidity
- AC Adaptor charger: Input 100 –240V, 50 to 60Hz, output 13.5Vdc ±5%, 24W
Suitable Applications for IP Rating 66:
Particles: 6 Protected against all dust —’dust-tight’;
Liquids: 6 Protected against Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3minutes, Water volume: 100litres per minute, Pressure: 100kPa at distance of 3m).
Suitable Applications:
Healthcare, pharmaceutical production, research, diagnostic laboratories and emergency responders. Suitable for protection against airbourne biohazards.
